Toilet Repair & Installation

Pecan Street Plumbing handles toilet repair and installation for running, clogged and leaking toilets, as well as new toilet installation.

01Toilets

What Is the Toilet Doing?

Each of these points somewhere different. The cause is confirmed at the toilet, not over the phone.

Water at the Base of the Toilet

A failed wax seal or a cracked base. Left alone it soaks the subfloor, so it is worth addressing before the floor becomes part of the repair.

A Toilet That Clogs Again and Again

Repeat clogs usually mean a partial blockage in the trap or the drain line, or an older low-flow model that never had the push. Either is fixable.

A Toilet That Runs or Refills on Its Own

A flapper or fill valve that no longer seals. Small parts, but a running toilet can waste a surprising amount of water every day.

Rocking, or Loose at the Floor

Bolts that have loosened or a flange that has corroded. Resetting the toilet fixes the movement and stops the seal from failing.

02Urgency

When a Toilet Problem Is Urgent

Most toilet trouble is a nuisance. Water where it should not be is not.

Usually Able to Wait a Little

  • A toilet that runs or refills on its own
  • A weak flush that still clears the bowl
  • A slight rock with a dry floor

Worth Dealing With Today

  • Water on the floor around the base
  • A crack in the tank or bowl that leaks
  • A bowl that keeps filling toward the rim
  • Wastewater coming up into a tub or shower

What to Do Right Now

None of this repairs the toilet. All of it limits the damage.

  • Close the Valve Behind the Toilet

    The small valve on the supply line behind the toilet stops water to the tank. If it is stiff, leave it rather than force it, and close the main shutoff instead.

  • Stop Flushing a Blocked Toilet

    Each flush sends more water into a line that cannot take it, and a blocked bowl can overflow onto the floor.

  • Keep the Floor Dry

    Towels around the base catch water from a failing seal and protect the floor until the toilet is looked at.

  • Note When the Water Appears

    After a flush, while the tank refills, or all the time. That detail usually points at which part has failed.

Toilet Repair & Installation

Talk to Pecan Street Plumbing

Serving Round Rock, TX.

03Repair or replace

Repair It or Replace It?

The part that failed and the condition of the bowl and tank decide it.

When a Repair Usually Makes Sense

The bowl and tank are sound and one part has worn out: a flapper, a fill valve, a flush handle or the wax seal under the base. Replacing that part usually restores the toilet without replacing the fixture.

When Replacement Makes More Sense

A cracked bowl or tank is a strong case for a new toilet. A design that clogs constantly, or an older model whose parts are hard to find, can make replacement the more practical choice, as can a bathroom being updated.

04Below the floor

Why a Leak at the Base Matters

A toilet sits on a wax ring that seals it to the drain flange in the floor. When that seal fails, a little water escapes with every flush, and much of it runs down into the subfloor rather than across the tile, where nobody sees it for a long time.

A toilet that rocks can work the seal loose over time. Setting the toilet on a new seal, with the flange sound and the bolts secure, stops the leak at its source. Left alone, the repair can grow to include the flooring and the subfloor beneath it.

05Cost

What Affects the Cost of Toilet Work

No two toilets take the same work. These change it most.

  • A Repair or a New Toilet

    Replacing a flapper or fill valve is a small job. Installing a new toilet takes more time, and the fixture itself.

  • The Condition of the Flange

    A sound flange only needs a new seal. A cracked or corroded one has to be repaired or replaced before the toilet can be set.

  • The Floor Beneath

    A dry, solid subfloor is ready for the toilet. One softened by a long-running leak needs attention first.

  • The Shutoff and Supply Line

    An old valve that no longer closes, or a worn supply line, is worth replacing while the toilet is off.

06Questions

Questions About Toilet Repair & Installation

Why does a toilet keep running?

A flapper that no longer seals, a fill valve set too high, or a chain that catches. All are quick to replace, and a running toilet can waste a great deal of water in a month.

Is a wobbling toilet a problem?

Usually, in time. Movement breaks the seal between the toilet and the drain, which lets water reach the floor underneath. Resetting the toilet on a new seal, with the flange sound, fixes both.

Why does a toilet flush weakly?

A flapper that closes too early, a tank water level set too low, or mineral buildup in the openings under the rim. Each is a small repair once the cause is found.

How do I know if a plumbing problem is urgent?

Water that cannot be stopped, sewage coming up, no water at all, or a smell of gas: urgent. A drip, a slow drain or a running toilet: worth fixing soon, but not tonight. When in doubt, shut off the water to the fixture and ask.

Should the water be turned off before the plumber arrives?

If water is actively leaking, yes: the fixture’s own valve, or the main if it doesn’t have one. A slow drip can wait, but a bucket under it will not hurt.

Pecan Street Plumbing

Ask About Toilet Repair & Installation

Pecan Street Plumbing handles toilet repair and installation for running, clogged and leaking toilets, as well as new toilet installation.